2022 China New Design Soldering Graphite Electrode - UHP Grades Graphite Electrodes – Sungraf Detail:
Products Details
The electrodes carry the electricity that heats electric arc furnaces, the vast majority steel furnaces. They are made from petroleum coke after it is mixed with petroleum pitch, extruded and shaped, then baked to sinter it, and then graphitized by heating it above the temperature (3000 °C) that converts carbon to graphite. They can vary in size up to 11 ft. long and 30 in. in diameter.
Usage
-
01
An increasing proportion of global steel is made using electric arc furnaces -
02
The electric arc furnace itself is getting more efficient and making more steel per tonne of electrode
Typical properties of UHP graphite electrodes
|
Applicable Furmace Dia |
AC Furnace |
DC Furnace |
|||
|
300-400mm |
450-500mm |
550-600mm |
650-700mm |
||
|
Bulk Density |
g/cm³ |
1.65～1.76 |
1.64～1.75 |
1.64～1.75 |
1.64～1.75 |
|
Specific Resistance |
μΩM |
4.2～6.0 |
4.2～6.0 |
4.2～6.0 |
4.2～5.5 |
|
Elastic Modulus |
Gpa |
7～14 |
7～14 |
7～14 |
7～14 |
|
kgf/mm² |
700～1,400 |
700～1,400 |
700～1,400 |
700～1,400 |
|
|
Flexural Strength |
MPa |
10.5～15 |
10～15 |
10～15 |
10～15 |
|
kgf/cm² |
105～150 |
100〜150 |
100-150 |
100～150 |
|
|
N/cm² |
1,050～1,500 |
1,000～1,500 |
1,000～1,500 |
1,000～1,500 |
|
|
Coefficient Of Thermal |
X10~-6/℃ |
1.0～1.5 |
1.0～1.5 |
1.0～1.5 |
1.0～1.4 |
|
Real Density |
g/cm³ |
2.20～2.23 |
2.20～2.23 |
2.20～2.23 |
2.20～2.23 |
|
Porosity |
% |
20～26 |
20～27 |
20～27 |
20～27 |
|
Ash Content |
% |
≤0.2 |
≤0.2 |
≤0.2 |
≤0.2 |
Typical properties of nipples
| Specifications |
≤φ400 |
φ450-500 |
φ550 |
φ600-700 |
| Specific Resistance (μΩM ) |
≤4.0 |
≤3.8 |
≤3.6 |
≤3.6 |
| Flexural Strength (MPa) |
18-24 |
17-25 |
20-28 |
20-28 |
| astic Modulus (GPa) |
≤18 |
≤18 |
≤18 |
≤18 |
| Bulk Density (g/cm³) |
1.76-1.84 |
1.78-1.84 |
1.79-1.86 |
1.79-1.86 |
| Coefficient Of Thermal Expansion (106/℃) |
0.9-1.3 |
0.9-1.2 |
0.9-1.1 |
0.9-1.1 |
| Ash Content (%) |
≤0.3 |
≤0.3 |
≤0.3 |
≤0.3 |
Current carrying capacity for UHP graphite electrodes
| Current Capacity Of UHP Graphite Electrodes | |||||
| Specifications | Current Capacity(A) | Current Density(A/cm²) | |||
| (inch) | (mm) | AC | DC | AC | DC |
| 12 | 300 | 18,000-32,000 | - | 24-43 | - |
| 14 | 350 | 22,000-39,000 | - | 22-39 | - |
| 16 | 400 | 28,000-47,000 | - | 21-36 | - |
| 18 | 450 | 34,000-55,000 | - | 21-33 | - |
| 20 | 500 | 41,000-63,000 | - | 20-31 | - |
| 22 | 550 | 48,000-70,000 | 65,000-78,000 | 19-28 | 26-32 |
| 24 | 600 | 55,000-80,000 | 75,000-90,000 | 19-27 | 26-31 |
| W | 650 | 69,000-89,000 | 87,000-104,000 | 20-26 | 25-30 |
| 28 | 700 | 80,000-100,000 | 100,000-120,000 | 20-25 | 25-30 |
Product detail pictures:
Related Product Guide:
Our corporation puts emphasis about the administration, the introduction of talented staff, plus the construction of team building, attempting hard to improve the quality and liability consciousness of team members. Our organization successfully attained IS9001 Certification and European CE Certification of 2022 China New Design Soldering Graphite Electrode - UHP Grades Graphite Electrodes – Sungraf , The product will supply to all over the world, such as: Mombasa, Slovenia, US, We believe in quality and customer satisfaction achieved by a team of highly dedicated individuals. The team of our company with the use of cutting-edge technologies delivers impeccable quality products supremely adored and appreciated by our customers worldwide.
By Edith from Mexico - 2018.12.22 12:52
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Klemen Hrovat from Lahore - 2017.07.07 13:00
