Factory Outlets Arc Furnace Graphite Electrode - UHP Grades Graphite Electrodes – Sungraf

Product Detail

Product Tags

Feedback (2)

Our staff through skilled training. Skilled skilled knowledge, potent sense of company, to satisfy the provider requirements of consumers for Micronized Graphite Powder, Natural Flake Graphite, Expandable Graphite Powder, We are now looking forward to even greater cooperation with overseas customers based on mutual benefits. If you are interested in any of our products, please feel free to contact us for more details.

Factory Outlets Arc Furnace Graphite Electrode - UHP Grades Graphite Electrodes – Sungraf Detail:

Products Details

The electrodes carry the electricity that heats electric arc furnaces, the vast majority steel furnaces. They are made from petroleum coke after it is mixed with petroleum pitch, extruded and shaped, then baked to sinter it, and then graphitized by heating it above the temperature (3000 °C) that converts carbon to graphite. They can vary in size up to 11 ft. long and 30 in. in diameter.

UHP Grades Graphite Electrodes (1)

Usage

01
An increasing proportion of global steel is made using electric arc furnaces
02
The electric arc furnace itself is getting more efficient and making more steel per tonne of electrode

Typical properties of UHP graphite electrodes

Applicable Furmace Dia Property		AC Furnace			DC Furnace
Applicable Furmace Dia Property		300-400mm 12″～16″	450-500mm 18″～20″	550-600mm 22″～24″	650-700mm 24″～28″
Bulk Density	g/cm³	1.65～1.76	1.64～1.75	1.64～1.75	1.64～1.75
Specific Resistance	μΩM	4.2～6.0	4.2～6.0	4.2～6.0	4.2～5.5
Elastic Modulus	Gpa	7～14	7～14	7～14	7～14
Elastic Modulus	kgf/mm²	700～1,400	700～1,400	700～1,400	700～1,400
Flexural Strength	MPa	10.5～15	10～15	10～15	10～15
	kgf/cm²	105～150	100〜150	100-150	100～150
	N/cm²	1,050～1,500	1,000～1,500	1,000～1,500	1,000～1,500
Coefficient Of Thermal Expansion (R.T.≤600℃)	X10~-6/℃	1.0～1.5	1.0～1.5	1.0～1.5	1.0～1.4
Real Density	g/cm³	2.20～2.23	2.20～2.23	2.20～2.23	2.20～2.23
Porosity	%	20～26	20～27	20～27	20～27
Ash Content	%	≤0.2	≤0.2	≤0.2	≤0.2

Typical properties of nipples

Specifications	≤φ400	φ450-500	φ550	φ600-700
Specific Resistance (μΩM )	≤4.0	≤3.8	≤3.6	≤3.6
Flexural Strength (MPa)	18-24	17-25	20-28	20-28
astic Modulus (GPa)	≤18	≤18	≤18	≤18
Bulk Density (g/cm³)	1.76-1.84	1.78-1.84	1.79-1.86	1.79-1.86
Coefficient Of Thermal Expansion (106/℃)	0.9-1.3	0.9-1.2	0.9-1.1	0.9-1.1
Ash Content (%)	≤0.3	≤0.3	≤0.3	≤0.3

Current carrying capacity for UHP graphite electrodes

Current Capacity Of UHP Graphite Electrodes
Specifications		Current Capacity(A)		Current Density(A/cm²)
(inch)	(mm)	AC	DC	AC	DC
12	300	18,000-32,000	-	24-43	-
14	350	22,000-39,000	-	22-39	-
16	400	28,000-47,000	-	21-36	-
18	450	34,000-55,000	-	21-33	-
20	500	41,000-63,000	-	20-31	-
22	550	48,000-70,000	65,000-78,000	19-28	26-32
24	600	55,000-80,000	75,000-90,000	19-27	26-31
W	650	69,000-89,000	87,000-104,000	20-26	25-30
28	700	80,000-100,000	100,000-120,000	20-25	25-30

Product detail pictures:

Related Product Guide:

Being supported by an highly developed and skilled IT group, we could offer you technical support on pre-sales & after-sales support for Factory Outlets Arc Furnace Graphite Electrode - UHP Grades Graphite Electrodes – Sungraf , The product will supply to all over the world, such as: India, Nigeria, Greece, With the aim of compete with good quality and develop with creativity and the service principle of take customers' demand as orientation, we will earnestly provide qualified products and solutions and good service for domestic and international customers.

Carbon Graphite Electrode

Eaf Electrode

Electrode Graphite Uses

Furnace Electrodes

Graphite Electrode Block

Graphite Electrodes Eaf

Impregnated Graphite Electrode

Rp Graphite Electrode

Super High Power Graphite Electrode

Ultra High Power Graphite Electrodes

The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.