Top Quality Super High Power Graphite Electrode - UHP Grades Graphite Electrodes – Sungraf Detail:
Products Details
The electrodes carry the electricity that heats electric arc furnaces, the vast majority steel furnaces. They are made from petroleum coke after it is mixed with petroleum pitch, extruded and shaped, then baked to sinter it, and then graphitized by heating it above the temperature (3000 °C) that converts carbon to graphite. They can vary in size up to 11 ft. long and 30 in. in diameter.
Usage
-
01
An increasing proportion of global steel is made using electric arc furnaces -
02
The electric arc furnace itself is getting more efficient and making more steel per tonne of electrode
Typical properties of UHP graphite electrodes
|
Applicable Furmace Dia |
AC Furnace |
DC Furnace |
|||
|
300-400mm |
450-500mm |
550-600mm |
650-700mm |
||
|
Bulk Density |
g/cm³ |
1.65～1.76 |
1.64～1.75 |
1.64～1.75 |
1.64～1.75 |
|
Specific Resistance |
μΩM |
4.2～6.0 |
4.2～6.0 |
4.2～6.0 |
4.2～5.5 |
|
Elastic Modulus |
Gpa |
7～14 |
7～14 |
7～14 |
7～14 |
|
kgf/mm² |
700～1,400 |
700～1,400 |
700～1,400 |
700～1,400 |
|
|
Flexural Strength |
MPa |
10.5～15 |
10～15 |
10～15 |
10～15 |
|
kgf/cm² |
105～150 |
100〜150 |
100-150 |
100～150 |
|
|
N/cm² |
1,050～1,500 |
1,000～1,500 |
1,000～1,500 |
1,000～1,500 |
|
|
Coefficient Of Thermal |
X10~-6/℃ |
1.0～1.5 |
1.0～1.5 |
1.0～1.5 |
1.0～1.4 |
|
Real Density |
g/cm³ |
2.20～2.23 |
2.20～2.23 |
2.20～2.23 |
2.20～2.23 |
|
Porosity |
% |
20～26 |
20～27 |
20～27 |
20～27 |
|
Ash Content |
% |
≤0.2 |
≤0.2 |
≤0.2 |
≤0.2 |
Typical properties of nipples
| Specifications |
≤φ400 |
φ450-500 |
φ550 |
φ600-700 |
| Specific Resistance (μΩM ) |
≤4.0 |
≤3.8 |
≤3.6 |
≤3.6 |
| Flexural Strength (MPa) |
18-24 |
17-25 |
20-28 |
20-28 |
| astic Modulus (GPa) |
≤18 |
≤18 |
≤18 |
≤18 |
| Bulk Density (g/cm³) |
1.76-1.84 |
1.78-1.84 |
1.79-1.86 |
1.79-1.86 |
| Coefficient Of Thermal Expansion (106/℃) |
0.9-1.3 |
0.9-1.2 |
0.9-1.1 |
0.9-1.1 |
| Ash Content (%) |
≤0.3 |
≤0.3 |
≤0.3 |
≤0.3 |
Current carrying capacity for UHP graphite electrodes
| Current Capacity Of UHP Graphite Electrodes | |||||
| Specifications | Current Capacity(A) | Current Density(A/cm²) | |||
| (inch) | (mm) | AC | DC | AC | DC |
| 12 | 300 | 18,000-32,000 | - | 24-43 | - |
| 14 | 350 | 22,000-39,000 | - | 22-39 | - |
| 16 | 400 | 28,000-47,000 | - | 21-36 | - |
| 18 | 450 | 34,000-55,000 | - | 21-33 | - |
| 20 | 500 | 41,000-63,000 | - | 20-31 | - |
| 22 | 550 | 48,000-70,000 | 65,000-78,000 | 19-28 | 26-32 |
| 24 | 600 | 55,000-80,000 | 75,000-90,000 | 19-27 | 26-31 |
| W | 650 | 69,000-89,000 | 87,000-104,000 | 20-26 | 25-30 |
| 28 | 700 | 80,000-100,000 | 100,000-120,000 | 20-25 | 25-30 |
Product detail pictures:
Related Product Guide:
We have been ready to share our knowledge of advertising and marketing worldwide and recommend you suitable products and solutions at competitive price ranges. So Profi Tools supply you benefit of money and we're ready to create with each other with Top Quality Super High Power Graphite Electrode - UHP Grades Graphite Electrodes – Sungraf , The product will supply to all over the world, such as: India, Cyprus, India, We have customers from more than 20 countries and our reputation has been recognized by our esteemed customers. Never-ending improvement and striving for 0% deficiency are our two main quality policies. Should you need anything, don't hesitate to contact us.
By Daisy from Greenland - 2018.06.09 12:42
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Edwina from Armenia - 2017.11.12 12:31
