Top Suppliers Electrodes And Graphite - UHP Grades Graphite Electrodes – Sungraf Detail:
Products Details
The electrodes carry the electricity that heats electric arc furnaces, the vast majority steel furnaces. They are made from petroleum coke after it is mixed with petroleum pitch, extruded and shaped, then baked to sinter it, and then graphitized by heating it above the temperature (3000 °C) that converts carbon to graphite. They can vary in size up to 11 ft. long and 30 in. in diameter.
Usage
-
01
An increasing proportion of global steel is made using electric arc furnaces -
02
The electric arc furnace itself is getting more efficient and making more steel per tonne of electrode
Typical properties of UHP graphite electrodes
|
Applicable Furmace Dia |
AC Furnace |
DC Furnace |
|||
|
300-400mm |
450-500mm |
550-600mm |
650-700mm |
||
|
Bulk Density |
g/cm³ |
1.65～1.76 |
1.64～1.75 |
1.64～1.75 |
1.64～1.75 |
|
Specific Resistance |
μΩM |
4.2～6.0 |
4.2～6.0 |
4.2～6.0 |
4.2～5.5 |
|
Elastic Modulus |
Gpa |
7～14 |
7～14 |
7～14 |
7～14 |
|
kgf/mm² |
700～1,400 |
700～1,400 |
700～1,400 |
700～1,400 |
|
|
Flexural Strength |
MPa |
10.5～15 |
10～15 |
10～15 |
10～15 |
|
kgf/cm² |
105～150 |
100〜150 |
100-150 |
100～150 |
|
|
N/cm² |
1,050～1,500 |
1,000～1,500 |
1,000～1,500 |
1,000～1,500 |
|
|
Coefficient Of Thermal |
X10~-6/℃ |
1.0～1.5 |
1.0～1.5 |
1.0～1.5 |
1.0～1.4 |
|
Real Density |
g/cm³ |
2.20～2.23 |
2.20～2.23 |
2.20～2.23 |
2.20～2.23 |
|
Porosity |
% |
20～26 |
20～27 |
20～27 |
20～27 |
|
Ash Content |
% |
≤0.2 |
≤0.2 |
≤0.2 |
≤0.2 |
Typical properties of nipples
| Specifications |
≤φ400 |
φ450-500 |
φ550 |
φ600-700 |
| Specific Resistance (μΩM ) |
≤4.0 |
≤3.8 |
≤3.6 |
≤3.6 |
| Flexural Strength (MPa) |
18-24 |
17-25 |
20-28 |
20-28 |
| astic Modulus (GPa) |
≤18 |
≤18 |
≤18 |
≤18 |
| Bulk Density (g/cm³) |
1.76-1.84 |
1.78-1.84 |
1.79-1.86 |
1.79-1.86 |
| Coefficient Of Thermal Expansion (106/℃) |
0.9-1.3 |
0.9-1.2 |
0.9-1.1 |
0.9-1.1 |
| Ash Content (%) |
≤0.3 |
≤0.3 |
≤0.3 |
≤0.3 |
Current carrying capacity for UHP graphite electrodes
| Current Capacity Of UHP Graphite Electrodes | |||||
| Specifications | Current Capacity(A) | Current Density(A/cm²) | |||
| (inch) | (mm) | AC | DC | AC | DC |
| 12 | 300 | 18,000-32,000 | - | 24-43 | - |
| 14 | 350 | 22,000-39,000 | - | 22-39 | - |
| 16 | 400 | 28,000-47,000 | - | 21-36 | - |
| 18 | 450 | 34,000-55,000 | - | 21-33 | - |
| 20 | 500 | 41,000-63,000 | - | 20-31 | - |
| 22 | 550 | 48,000-70,000 | 65,000-78,000 | 19-28 | 26-32 |
| 24 | 600 | 55,000-80,000 | 75,000-90,000 | 19-27 | 26-31 |
| W | 650 | 69,000-89,000 | 87,000-104,000 | 20-26 | 25-30 |
| 28 | 700 | 80,000-100,000 | 100,000-120,000 | 20-25 | 25-30 |
Product detail pictures:
Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of team building, attempting hard to boost the standard and liability consciousness of personnel customers. Our corporation successfully attained IS9001 Certification and European CE Certification of Top Suppliers Electrodes And Graphite - UHP Grades Graphite Electrodes – Sungraf , The product will supply to all over the world, such as: San Diego, Madagascar, Toronto, Our company adheres to the spirit of lower costs, higher quality, and making more benefits for our clients. Employing talents from the same line and adhering to the principle of honesty, good faith, real thing and sincerity, our company hopes to gain common development with clients from both at home and abroad!
By Adelaide from Suriname - 2018.09.21 11:01
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
By Carlos from Switzerland - 2018.06.09 12:42
