Ibicuruzwa birambuye
Ibisobanuro: Urupapuro rworoshye rwa grafite rwakozwe hamwe na grafite yagutse.Urupapuro rwa “Sungraf” rworoshye rwa grafite rufite ubwiza buhanitse bwa 99% bya karubone
Ibyiza
imiti irwanya imiti, itwara neza ubushyuhe, hamwe na kashe nziza.
Ikoreshwa
- 01 Nkibikoresho bya gasike, mubisanzwe bihimbwa muri Graphite Laminate, urupapuro rukomeye rwa grafite
- 02 ikoreshwa cyane mubikorwa byo gufunga amazi: flange gasketi, igikomere cya spiral, icyuma gihindura ubushyuhe, nibindi.
- 03 Irashobora kandi gukoreshwa nkamavuta akomeye mugushiraho kashe no gushiraho porogaramu, cyangwa nka lisansi yubushyuhe mu ziko ryinganda nibindi bikoresho byo gushyushya.
Ingano
| Andika | Umubyimba (mm) | Ubugari (mm) | Uburebure (mm) |
| Amabati | 0.2-6.0 | 1000, 1500 | 1000, 1500 |
| Muri Rolls | 0.2-1.5 | 1000, 1500 | 30m-100m |
Ibikoresho bya tekiniki: (Umwihariko udasanzwe wujuje ibyifuzo byabakiriya.)
| SGM-A | SGM-B | SGM-C | SGM-CC | |
| Ibirimo Carbone (%) | 99.5 | 99.2 | 99.0 | 99.0 |
| Ibirimo bya sufuru (PPM) | 200 | 500 | 1000 | 1200 |
| Ibirimo bya Chloride (PPM) | 20 | 30 | 40 | 50 |
| Ubworoherane Bwinshi (g / cm3) | ± 0.03 | ± 0.03 | ± 0.04 | ± 0.05 |
| Ubworoherane bwimbitse (mm) | ± 0.03 | |||
| Imbaraga za Tensile (Mpa) | ≥4.0 | |||
| Kwiyunvira (%) | ≥40 | |||
| Gukira (%) | ≥10 | |||
SGM-C Urupapuro rworoshye rwerekana urupapuro rwubuhanga
| Ubucucike | 1.0g / cm3 |
| Ibirimwo | 99% |
| Ibirimo ivu ASTM C561 | ≤1% |
| Chloride ishobora kuboneka ASTM D-512 | 50ppm Byinshi. |
| Ibirimo bya sufuru ASTM C-816 | 1000ppm Byinshi. |
| Fluoride Ibirimo ASTM D-512 | 50ppm Byinshi. |
| Ubushyuhe bwo gukora | -200 ℃ kugeza + 3300 ℃ Kutagira Oxidizing -200 ℃ kugeza + 500 ℃ Oxidizing -200 ℃ kugeza + 650 ℃ Imashini |
| Umuvuduko | 140bar Max. |
| Imbaraga | 998psi |
| Guhagarika umutima DIN 52913 | 48N / mm2 |
| Kuruhuka kurema ASTM F-38 | <5% |
| Kwiyoroshya ASTM F36A-66 | 40 - 45% |
| Kugarura ASTM F36A-66 | ≥20% |
| Gutakaza Ignition | Munsi ya 1% (450 ℃ / 1Hr) Munsi ya 20% (650 ℃ / 1Hr) |
| Ikidodo ASTM F-37B lisansi A. | <0.5ml / h |
| Kurwanya amashanyarazi | 900 x 10-6 ohm cm ibangikanye n'ubuso 250, 000 x 10-6 ohm cm Perpendicular kubuso |
| Amashanyarazi | 120 Kcal / m Isaha.℃ ugereranije n'ubuso 4Kcal / m Isaha.℃ Perpendicular to surface |
| Kwagura Ubushyuhe | 5 x 10-6 / ℃ ugereranije n'ubuso 2 x 10-6 / ℃ Perpendicular to surface |
| Coefficient de frais | 0.149 |
| PH | 0-14 |
