Lintlha tsa Lihlahisoa
Tlhaloso: Letlapa le feto-fetohang la graphite le entsoe ka graphite e atolositsoeng e hloekileng.Letlapa la "Sungraf" la "graphite" le bonolo le na le bohloeki bo phahameng ba 99% ea khabone
Melemo
ho hanyetsa lik'hemik'hale ho molemo, conductivity e ntle ea mocheso, le ho tiiseha ho molemo.
Tšebeliso
- 01 Joalo ka thepa ea gasket, hangata e entsoe ka Graphite Laminate, letlapa la graphite le matlafalitsoeng
- 02 e sebelisoa haholo lits'ebetsong tsa ho tiisa mokelikeli: gasket ea flange, gasket ea leqeba la spiral, gasket ea mocheso oa mocheso, joalo-joalo.
- 03 E ka boela ea sebelisoa e le lubricant e tiileng ho setempe sa tšepe le ho etsa lits'ebetso, kapa joalo ka mochini o futhumatsang mocheso liboping tsa indasteri le lisebelisoa tse ling tsa ho futhumatsa.
Boholo
| Mofuta | Botenya (mm) | Bophara (mm) | Bolelele(mm) |
| Ho Lipampiri | 0.2-6.0 | 1000, 1500 | 1000, 1500 |
| Ho Rolls | 0.2-1.5 | 1000, 1500 | 30m-100m |
Thepa ea Tekheniki: (Litlhaloso tse Khethehileng li kopana le litlhoko tsa bareki.)
| SGM-A | SGM-B | SGM-C | SGM-CC | |
| Khabone (%) | 99.5 | 99.2 | 99.0 | 99.0 |
| Sebabole (PPM) | 200 | 500 | 1000 | 1200 |
| Litaba tsa Chloride (PPM) | 20 | 30 | 40 | 50 |
| Mamello ea Tekano (g/cm3) | ±0.03 | ±0.03 | ±0.04 | ±0.05 |
| Mamello e Metenya (mm) | ±0.03 | |||
| Tensile Strength (Mpa) | ≥4.0 | |||
| Compressibility (%) | ≥40 | |||
| Khutlisa (%) | ≥10 | |||
SGM-C Flexible graphite sheet Data Data
| Botenya | 1.0g/cm3 |
| Litaba tsa Carbon | 99% |
| Molora Content ASTM C561 | ≤1% |
| Leachable Chloride ASTM D-512 | 50ppm Max. |
| Sekahare sa Sebabole ASTM C-816 | 1000ppm Max. |
| Likahare tsa Fluorides ASTM D-512 | 50ppm Max. |
| Mocheso oa Mosebetsi | -200 ℃ ho +3300 ℃ Non-Oxidizing -200 ℃ ho +500 ℃ Oxidizing -200 ℃ ho +650 ℃ Mouoane |
| Khatello | 140bar Max. |
| Matla a tšepe | 998psi |
| Khatello ea Maikutlo DIN 52913 | 48N/mm2 |
| Creep Relaxation ASTM F-38 | <5% |
| Compressibility ASTM F36A-66 | 40 - 45% |
| Ho tsosolosa ASTM F36A-66 | ≥20% |
| Tahlehelo ea ho Ignition | Ka tlase ho 1%(450℃/1Hr) Ka tlase ho 20% (650 ℃/1Hr) |
| Sealability ASTM F-37B mafura A | <0.5ml/h |
| Ho hanyetsa Motlakase | 900 x 10-6 ohm cm e bapile holimo 250, 000 x 10-6 ohm cm, Perpendicular to surface |
| Thermal Conductivity | 120 Kcal/m Hr.℃ e bapileng le bokaholimo 4Kcal/m Hr.℃ Perpendicular to surface |
| Katoloso ea Mocheso | 5 x 10-6 / ℃ e bapileng le bokaholimo 2 x 10-6 / ℃ Perpendicular to surface |
| Frictional Coefficient | 0.149 |
| PH | 0-14 |
